A advanced semiconductor oxide alcohol sensor
Quick response and resume
SMD assembling, stable performance
Smart MCU control
Direct testing process LCD indication
No touch health design
Audio warning beyond preset limit battery saved design, low voltage indication
Wide measure range: 0.00-0.19%BAC and 0.0-1.9g/L or 0.00-0.95mg/L BRAC
High accuracy: ±0.01% BRAC
Digital display,red background light
Full new and good material
breathalyzer digital breathalyzer cheap breathalyzer personal alcohol breath tester led alcohol breath tester
|Detection range ||0.00% - 0.19% BAC / 0.00- 0.95 mg/l |
|Sensor ||Semiconductor alcohol sensor |
|Digital display results ||% BAC / mg/l |
|Warm-up time ||Within 10 seconds |
|Respond time ||Within 5 seconds |
|temperature range ||5 ~ 40 oC |
|Power input ||2*AAA 1.5V alkaline batteries (not included) |
Auto power off
After the result be display for about 10 seconds, the "OFF" symbol will appear for 2-3 seconds and the alcohol tester be turned off.
* Sensor: advanced semiconductor oxide alcohol sensor
* Range: 0.00%-0.19% BAC (0.0-1.9g/l)
* Accuracy: 0.01% BAC (0.1g/l)
* Power input: 2×1.5V "AAA" alkaline battery
* Operating time: warm up: 10s, response: <5s
* Auto power off: 1 minute approx
* Dimension: 118×70×28mm
-- When after drinking, it is recommended to last after 20 minutes, it is because 20 minutes is approximately for alcohol to be absorbed into blood from the digestive organs, and residual alcohol remaining in the mouth takes this long to dissipate.
-- For accurate result, do not repeat next testing within 3 minutes after last time.
-- Do not smoke and eat for 20 minutes prior testing.
-- Do not use chemicals to clean the tester directly.
-- Do not blowing liquid into the breath pipe.
-- Do not use any excitant substances near the tester, such as paint, insecticides, alcohol.
-- Do not place the tester in the closed environment with contaminated air.
-- The result of this alcohol gives BAC for reference only, manufacturer does not to take any legal responsibility.